Position Status Display
View each axis position and operating status together for checking during adjustment.
FHES / ELECTRIC POSITIONING SYSTEM
Motorized Printhead
Positioning System
Set a home position, working positions and multiple presets. Motorized left/right movement and automatic homing help quickly position printheads and visual inspection components during product changeovers.
Set once and reach the position with one touch. The image shows a wide-format production-line application from the product brochure; the actual structure and configuration are subject to project delivery.
±0.1 mmPositioning accuracy up to*
Multiple Working PositionsSave presets to product specifications
Automatic HomingReturn to the position reference
01 / POSITION MANAGEMENT
Preset Common Positions and Recall Them at Changeover
Use the home position as the reference, and save printing or inspection working positions by product specification for a clearer adjustment basis.
01 / SETEstablish the Home Position
Record a common position reference.
02 / SAVESave Working Positions
Preset positions for different products or widths.
03 / CALLRecall the Target Position
Select the required printing or inspection workstation.
04 / MOVEMove into Position Electrically
Supports left/right movement and automatic homing.
Working-position count, effective travel and movement-mechanism structure are configured for the project; brochure illustrations do not represent fixed specifications.
02 / OPERATION
View Positions, Jog to Adjust and Recall Saved Positions
Bring common site positioning operations into the control interface for easier adjustment and product changeover.
Left/Right Jog Adjustment
Approaching target position through directional control.
Recall Saved Positions
Save common positions and apply presets when switching.
The control interface in the brochure is illustrative; specific functions depend on the delivered software and site configuration.
03 / APPLICATIONS
For Workstations Where Repeated Manual Positioning Is Inconvenient
Configure position adjustment for printheads and visual inspection components according to site space, load and production-line cycle time.
01 / WIDE WEBWide-Format Printing and Roll Materials
Recall printing or inspection working positions when the width changes to reduce repeated measurement.
02 / TIGHT SPACEConfined or Deep Mounting Locations
Use motorized control to adjust hard-to-reach positions.
03 / CHANGEOVERFrequent Product-Size Changeovers
Save positions for different specifications, and use the presets at changeover.
04 / PROJECT REVIEW
Confirm Travel, Load and Installation Space First
Movement speed, load capacity, power supply, interfaces and other parameters are determined by the project plan and delivered technical documents.
Mechanical and positioning conditions
- Photos of production lines, space available for installation and movement direction
- Required movement range, home position and working positions
- Printhead, camera and accessory weight, and mounting rigidity
Control and Changeover Conditions
- Changeover cycle time and positioning requirements
- Power supply, control interfaces and routing of tubing/cables
- On-site acceptance method and actual load conditions
* The brochure states positioning accuracy can reach ±0.1 mm; confirm actual performance against load, effective travel, mounting rigidity and site conditions. This is not complete-machine printing accuracy or visual inspection accuracy.
APPLICATION TEST / FHES
Explore Project Compatibility
Provide installation-space photos, movement range, component weights and changeover cycle time to help check the motorized positioning mechanism and control configuration.