FHES / SL SERIES LED UV
Water-Cooled UV Curing,
Select Configuration by Production Line
The SL series LED UV water-cooled curing equipment offers three lamp-head sizes: 6040, 6545 and 8060. Each is available with B1 variable-frequency energy control or V1 knob adjustment, giving six configurations in total.
Based on the updated SL series brochure. The test distance and conditions for stated irradiance are not specified; validate curing using actual samples with the ink, material and line speed.
SL SERIES / WATER-COOLED LED UV01 / SL SERIES
One Series, Three Lamp-Head Sizes
SL6040, SL6545 and SL8060 are all available with B1 variable-frequency energy control and V1 knob-resistor control.
02 / MODEL COMPARISON
Six Configurations Compared in One Table
For the same size, B1 and V1 have identical power and brochure-stated irradiance; the main difference is the control method.
| Product model | Rated Power | Stated Irradiance* | Adjustment method | Trigger method |
|---|---|---|---|---|
| SL6040-B1 ↗ | 400 W | ≥13,000 mW/cm² | Variable-Frequency Energy Control | On/off / printer-linked trigger / variable-frequency energy control |
| SL6040-V1 ↗ | 400 W | ≥13,000 mW/cm² | Knob-Resistor Control | On/off / printer-synchronized trigger |
| SL6545-B1 ↗ | 800 W | ≥17,000 mW/cm² | Variable-Frequency Energy Control | On/off / printer-linked trigger / variable-frequency energy control |
| SL6545-V1 ↗ | 800 W | ≥17,000 mW/cm² | Knob-Resistor Control | On/off / printer-synchronized trigger |
| SL8060-B1 ↗ | 800 W | ≥13,000 mW/cm² | Variable-Frequency Energy Control | On/off / printer-linked trigger / variable-frequency energy control |
| SL8060-V1 ↗ | 800 W | ≥13,000 mW/cm² | Knob-Resistor Control | On/off / printer-synchronized trigger |
* The updated brochure does not specify irradiance test distance or measurement conditions. Original links to the older GT series and SL8060-01V materials are retained; the current page follows the updated SL brochure. Confirm corresponding model names against the delivered nameplate.
03 / LINE INTEGRATION
Coordinate Cooling, Power, Signals and the Lamp Head
All six models use planar irradiation and water cooling; check interface definitions against the specific version and delivered equipment.
Check water-tank level, tubing connections and water flow; do not operate without water.
Check connections against the equipment nameplate and site power-supply conditions.
B1 supports variable-frequency energy control; V1 uses knob-resistor adjustment. Check on/off and printer-linked interfaces for both.
04 / APPLICATION REVIEW
Test Curing with the Target Ink and Material
Results depend jointly on irradiation distance, line speed, ink layer, substrate and light source; validate stated values under site operating conditions.
Process conditions
- UV ink model, printed area, ink layer and substrate
- Target line speed, irradiation distance and curing assessment method
- Whether B1 variable-frequency energy control or V1 knob adjustment is required
Conditions for installation
- Installation space for the controller, water-cooling loop and lamp head
- Check lamp-head dimensions, hole spacing and water-tube bending space for the size
- Verify trigger/control signals and the delivered nameplate against the actual equipment
APPLICATION TEST / FHES
Explore Project Compatibility
Provide the ink, substrate, production-line speed and installation conditions, and check curing configuration through sample testing.