FHES / LED UV MODEL SL6040-V1
SL6040-V1
Water-Cooled Curing Equipment
SL6040-V1 LED UV water-cooled curing equipment, 400 W, nominal irradiance ≥13,000 mW/cm², with resistive knob adjustment.
The brochure does not state the test distance or measurement conditions for nominal irradiance; validate final curing results with actual samples using the ink, material, distance and line speed.Source: FHES LED UV Water-Cooled Curing Equipment Series Brochure (13 pages), pages 2 and 7–10
SL6040-V1 / Brochure Illustration01 / HIGHLIGHTS
Product Highlights
≥13,000 mW/cm² nominal irradiance stated in the brochure
Resistive Knob Adjustment
02 / SPECIFICATIONS
Key parameters
- Rated electrical power
- 400 W
- Nominal irradiance
- ≥13,000 mW/cm²
- Adjustment method
- Knob-Resistor Control
- On/Off / Trigger
- On/off / printer-synchronized trigger
- Input power
- AC 220 V / 50 Hz
- Center wavelength
- 395 ± 5 nm
- Irradiation pattern
- Planar irradiation
- Irradiation distance
- 5–100 mm, depending on the application
- Energy adjustment
- 0–100%
- Turn-on time
- ≤0.3 s
- Lamp head dimensions (length × width × height)
- 90 × 59 × 60 mm
- Four-hole spacing on bottom
- 80 × 45 mm
- Side-hole spacing
- 30 / 65 mm
- Two-hole spacing on end face
- 30 mm
- Mounting screw holes
- M4 / Hole depth stated in the source: 6 mm
- Cooling method
- Water cooling
The brochure does not state the test distance or measurement conditions for nominal irradiance; validate final curing results with actual samples using the ink, material, distance and line speed. The delivered configuration is subject to the order and project testing.
APPLICATION TEST / FHES
Arrange Sample Testing for SL6040-V1
Provide the target ink, substrate, line speed and irradiation distance to check curing results, lamp head installation and control interfaces.